Select Load BIOS from
Disc
The disc tray should
now automatically eject. Insert the disc and press
the
eject button.
This is what happens
if your X3 has its flash protection enabled. You
wont
be able to update anything at this stage. You
need to make sure the flash
protection is set to off on the mod and on the
switch if you have it connected.
You will need to start over from the beginning.
This is what happens
if your disc was not created correctly. You wont
be
able to update anything at this stage. You need
to follow the procedure again
and make sure you do it right this time - either
that or use better media.
You will need to start over from the beginning.
As you can see the
1MB (1024k) Bios has been grabbed from the hard
drive,
the X3 2MB (2048k) Flash Rom has been detected
and things are progressing
nicely. The yellow bar = ERASING.
Superb we are almost
there. The green bar = FLASHING.
The Flash has now
completed. The Xbox will now turn off automatically.
Now turn it back on again yourself (quick press
power button so X3 Logo
on switch is BLUE).
Success! Enjoy Your
new Xbox adventure.
|
