NOTE: Opening the lid of the xbox will void
any waranty currently on it.
Even removing the stickers may result in a void.
Click to enlarge
Remove the 6 screws from the base using the Torx 20
screw driver.
You will need to either make a hole in the stickers or
peal them up to remove the two hidden screws.
With one hand hold the top of the case and turn it over.
The case can now be lifted open to reveal the Hard Drive
and DVD Rom.
Using a Torx 10 screw driver you can now remove
the three screws from inside of the xbox.
Screws 1+2 hold the front part of the DVD Rom to the
case.
Screw 3 holds the inside housing to the case.
