Buy Xecuter 2.6 lite CE $33.49

This tutorial was written by: Xb0XmAn - http://www.yoxbox.com/tut/xecuter2-6v1-6

Beginner
(if you are a beginner start here)

Experienced
(if you're experienced you can start here)

  1. Begin / Partslist
  2. Open XBOX
  3. Remove DVD drive and HD
  4. Unplug DVD drive and HD
  5. Unscrew motherboard

6. PIN header
7. Place a box
8. Soldering LPC and HDD/D0/LAN
9. Solder alternate 5V
10. Place chip
11. Pop off the front panel
12. Place the front switch
13. Final testrun and FLASH
 

1. Xecuter 2. 6 lite CE chip
2. D0/HDD/LAN cable
3. 5v cable
4. Reset / Eject Cable
5. External switch cable
6. Front Switch
7. Wire Install Adapter
8. Pin Header

Tools:
torx 10 screwdriver
torx 20 screwdriver
Soldering iron
Solder

Next >>