|
ALTERNATE
OPENING GUIDE
XCM
Wii ii-CASE INSTALL GUIDE
XCM
Wii HOTROCK I-CASE INSTALL GUIDE
XCM
Wii DVD LED / FAN COVER INSTALL GUIDE (FOR
THE CHAMELEON / CRYSTAL SERIES OF CASES)
Wii
ii-CASE INSTALL VIDEO (2.9MB .WMV)
ALL
XCM WII CASE MODS NOW IN
STOCK!
XCM
Wii DISSASEMBLY VIDEO (3.9MB .WMV)
Wii DISSASEMBLY GUIDE FROM XCM
1.As indicated by the picture, remove the 4 bottom left rubber
stand and screws by using the screw driver provided.
(keep the screws, don't lose them)
2.As indicated by the picture, remove the bottom rubber stand
and screws by using the classic screw driver provided.
3.remove the battery and the screw.
4.Follow the instruction to
take off these 2 plastic plates.
5.As indicated by the picture, remove those 3 screws
by using the classic screw driver provided.
6.Remove the top plate of the console then those 4 screws.
7.As indicated by the picture, unplug the power source.
8.Remove the right plastic plate and the metal DVD rom cover, and take off
the screws as indicated in the picture.
9.Open the DVD rom ,and follow the instruction of the number
to take off the cables.
10.Remove those screws.
11.As shown in the picture, unplug the power source of the
fan.
12.Remove the fan and the flow wind tunnel then take off
3 screws.
13.Remove the black plastic part then take off those 14 screws.
14.Take off the tape then remove the metal part.
15.Take off 4 screws and remove the heat sink.
16.Remove all the parts from the left plastic plate, disassembly
finished
|
