|
Thank
you to XCM Team for this TUTORIAL!
Get your XBOX 360 Case Mods HERE
Get your
XBOX 360 UNLOCK KIT HERE
IF
YOU ARE LOOKING FOR THE XCM CASE INSTALLATION GUIDE GO HERE
IF
YOU ARE LOOKING FOR THE XCM X-WINDOW W/ LEDS GUIDE GO HERE
IF
YOU ARE LOOKING FOR THE XCM CUSTOM 360 CASE W/ LEDS GUIDE
GO HERE
1.XCM 360 full case replacement parts and
installation tools displayed.
2.As indicated in the diagram, follow the
arrow and install the DVD ROM cover.
3.Follow the direction as indicated by the arrows and use
the tool as indicated to put on the screws.
4.Install the DVD ROM eject button as indicated.
5.Put together the XCM 360 full replacement
case bottom and top panel.
6.Make sure the hooks and slots line up properly.
7.As indicated install the bottom heat sink
cover.
8.As indicated in diagram A, first put down
the front of the top heat sink cover. Then push down
as indicated by diagram B.
9.As indicated to install the HD slot cover,
push in the direction of (1) and down in the direction of
(2).
10.Install the XCM 360 faceplate as indicated.
11.Finished installation.
|
